2.4GHz Wireless Electric Skateboard Remote Control with ABS Rubber Coating - DIY Replacement Part for Electric Longboards & Skateboards - Perfect for Commuting, Cruising & Outdoor Adventures

This electric skateboard remote has a streamlined layout that is more ergonomic, easier to control, and tighter.Specification:Item Type: Electric skate-board remoteMaterial: ABS + rubber spray paint surfaceModel: VX1 remote control 2.4Ghz Remote VX1 for DIY electric skate-board2.4Ghz BandwidthSupport 3 Rate ModesSupport Cruise ModePower Indicator for Remote Control and Electric skate-boardSupport for Checking Remote Battery LevelComfortable Touch: ABS + rubber painted surfaceLi-ion Rechargeable BatteryWristbandVX1 Remote Control Comes with ReceiverPackage List:1 x Remote Control 1 x USB Cable1 x User Manual2 x Connection Line1 x ModuleNote:1. Please carefully check the following receiver wiring diagrams corresponding to different FSESCs. Wrong connection of the receiver side cable will cause the receiver to burn.2. The variants (for VESC4/for VESC6/for non‑VESC) differ just in the receiver cable, the remote control is the same.3. When selecting the UART mode connection for the VX1 remote receiver, please program in the VESC tool before connecting. Otherwise, it will affect programming. And in UART mode, no remote adjustment is required.

PARAMETERS: product name electric skateboard remote control. Material ABS+rubber painted surface. Model VX1 Remote control 2.4Ghz Remote VX1 for DIY electric skateboard. 2.4Ghz bandwidth. Support 3 speed modes. Support cruise mode. Remote control and electric skateboard power indicator .Support to check remote battery level.Li-ion rechargeable battery.Wristband.VX1 remote control comes with receiver.

2.4G RADIO: The Electric Skate Board Remote adopts 2.4G radio technology, strong anti-interference ability, supports triple-speed mode and cruise control, has battery indicator light, feels good, ABS surface injection treatment, lithium battery charging.

STRONG SIGNAL: The Wireless Skate Board Remote is equipped with a 2.4GRF receiver, which can adapt to most ESCs, get rid of the traditional one-for-two, and has a wider application range and a strong signal.

THERE IS A CONSTANT SPEED CRUISE MODE: The DIY Skate Board Remote has a constant speed cruise mode, so you don't have to worry about long-press fatigue and solve the problem of uneven speed.

4 HOURS OF CONTINUOUS USE: The DIY Electric Skate Board Remote can be used continuously for more than 4 hours; it will automatically shut down after long-term standby; it will remind you of low battery vibration.